This shows you how to install a simple plug-n-play projector. If you’d like to see some professional installs check out IznTrblInc YouTube channel his work is amazing! The projector I’m installing is the Bi-Xenon Morimoto Mini H1 from theretrofitsource.com. This projector is as plug-n-play as it gets as far as projector retrofits are concerned. Tools I used(will vary apon your build); Phillips Screwdriver Pliers Dremel Tool Air Compressor Sharpie (to mark my cuts) Scissors (for the aluminum tape) 1. Temporarily fit the projector in the headlight 2. Test fit the projector shroud 3. If the shroud requires to be cut mark accordingly and cut 4. If you cut make sure everything is thoroughly blown off of dust particles 5. Attach any aluminum tape to the projector if you need to 6. Mount the shroud to the projector 7. Clean every surface that will be seen on the headlight and projector 8. Install the projector into the headlight 9. Test your headlight on your vehicle to ensure that you mounted the projector in properly
