May 04 2012

Nice Home Audio & Home Theater photos

Category: Home Audio & Home TheaterDigitalReviews @ 12:18 am

A few nice Home Audio & Home Theater images I found:

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Tags: , , , ,


Apr 28 2012

Nice Home Audio & Home Theater photos

Category: Home Audio & Home TheaterDigitalReviews @ 4:18 pm

A few nice Home Audio & Home Theater images I found:

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Tags: , , , ,


Apr 25 2012

Desktop Audio Upgrade

Category: Home Audio & Home TheaterDigitalReviews @ 6:18 pm

Some cool Home Audio & Home Theater images:

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Tags: , ,


Apr 13 2012

Desktop Audio Upgrade

Category: Home Audio & Home TheaterDigitalReviews @ 11:18 am

A few nice Home Audio & Home Theater images I found:

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Desktop Audio Upgrade
Home Audio & Home Theater

Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of years now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few years ago I was doing some research into speakers and I came across the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I decided to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was selling individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked identical to the Quad 11l actives. Plus, they were brand new, in unopened boxes.

After a few hours of research I discovered that IAG, Quad’s parent company, has an Industrial division that market audio equipment for hotels, conference centres, lecture theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is identical in every way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a big fan of the Quad sound. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad sound as part of my desktop system at a fraction of the price.

Quad speakers are known for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other great speakers out there. For me I liked the cachet associated with being a Quad owner. I clearly liked the sound and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another important factor was matching the speakers across the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you’ll listen to. So how do the Quad actives sound? Well put it this way… I’ve not stopped playing them since the minute they arrived in the house. I’ve thrown everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may sound better than the 12l2s in my front room due to the fact that their bi-amp design is perfectly matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the sound could be characterised as being clean, clear with tight bass control and a surprising amount of depth considering the cabinet size. However being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s sound card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an old radio tuner through these. All I could lay my hands on at short notice was a phono switchbox. This worked but it was difficult to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the sound the iMac was capable of producing. Looked like a DAC was required. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio’s Dacmagic or NuForce’s uDac or Icon products. Fundamentally it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce’s website information is confusing. Being new to the world of DACs and desktop audio I knew little about using USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on sound quality and the technology used by NuForce to take correct these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We’re talking thousands of pounds. Their ‘desktop’ range is much more affordable however. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can’t say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a purely digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most useful piece of hi-fi equipment I’ve ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is presented to the listener. Given I’m used to the full Quad/Arcam experience in the front room it’s amazing how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you’ll see from the photos I’ve experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it’s really not required the system is already capable of producing almost terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I’ve been particularly enjoying the albums below. I’ve pretty much moved into the backroom! All in all, a pretty good October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Tags: , ,


Apr 13 2012

Onkyo TX-SR607 7.2 Channel Home Theater Receiver

Category: Home Audio & Home TheaterDigitalReviews @ 10:18 am

www.jr.com The Onkyo TX-SR607 raises the bar once again in the competitive world of Mid-Range home-theater. With modes of up to 7.1 Channel Surround sound, this Receiver is ready to faithfully reproduce Blu-Ray surround capability. Then the TX-SR607 tops that. There are 7.2 channels. That allows up to 2 subwoofers – one for left channel and one for right channel. Whether you’re aiming for Stereo or the ultimate in surround, this receiver is ready to power it out for grand home-theater sound control and entertainment. With HDMI 1.3a inputs for up to six components, its ready to handle all your High-Definition Video and Audio needs. Whether its a Blu-ray Disc player, a cable or satellite box, or a gaming console, your video signals will be traveling first class. Lower-resolution Analog video signals, meanwhile, can be upscaled to 1080i and fine-tuned by Faroudja DCDi Edge. HDMI version 1.3a also transports the master-quality HD audio formats, DTS-HD Master Audio and Dolby TrueHD. The very latest Dolby technology, Dolby Pro Logic IIz, enhances the spatial sensation of music, movies, and video games by letting you incorporate front height channels. The TX-SR607 packs an array of convenient Connectivity options, allowing you to incorporate HD Radio, iPod and MP3 players, Sirius Satellite Radio, and more. Four specialized gaming modes, Audyssey room-correction technologies, and Zone 2 capability add the gloss to what is a phenomenal all-round package.

Tags: , , , , ,


Apr 04 2012

2012-2-05 Super Bowl XLVI Halftime Show – Madonna

Category: Home Audio & Home TheaterDigitalReviews @ 6:18 pm

A few nice Home Audio & Home Theater images I found:

2012-2-05 Super Bowl XLVI Halftime Show – Madonna
Home Audio & Home Theater

Image by JanetandPhil
Super Bowl XLVI Halftime Show – Madonna – 5 February 2012

Super Bowl XLVI was played between the American Football Conference (AFC) champion New England Patriots and the National Football Conference (NFC) champion New York Giants at Lucas Oil Stadium in Indianapolis, Indiana. The Giants won 21-17.

Yodabashi Audio/Video floor
Home Audio & Home Theater

Image by Jeremy Toeman
Yodabashi has all your stereo and home theater needs

Disney – Mann’ s Chinese Theater
Home Audio & Home Theater

Image by Express Monorail
This is a picture of the exterior of The Great Movie Ride at Disney’s Hollywood Studios of Walt Disney World in Orlando, Florida.

At the end of Hollywood Boulevard, dead center, stands a magnificent reproduction of the famous Mann’s Chinese Theater, home to The Great Movie Ride. As part of the 100 Years of Disney celebration, the view of the theater was obscured by the installation of the Sorcerer Mickey Hat, a new icon for the theme park. One of the Disney’s Hollywood Studios’ original attractions when it opened in May 1989, and presented by Coca-Cola, the Great Movie Ride is a 22-minute journey into the history of the movies, with a cast of Audio-Animatronics characters re-creating memorable movie moments.

Tags: , , , , , ,


Mar 31 2012

Pioneer VSX-820-K 5.1 Home Theater A/V Receiver Black

Category: Home Audio & Home TheaterDigitalReviews @ 1:19 am

More Specs: www.parts-express.com Mike explains the benefits of the Pioneer VSX-820-K like how it delivers amazing home theater performance in an elegant package at a surprising value. www.parts-express.com The #1 Source for Audio, Video and Speaker Building Components!
Video Rating: 5 / 5

Tags: , , , , ,


Mar 16 2012

Music Studio

Category: Home Audio & Home TheaterDigitalReviews @ 9:28 pm

Some cool Home Audio & Home Theater images:

Music Studio
Home Audio & Home Theater

Image by aaronernestoortizlopez
I use my computer for software development, but at home I have a
mini-studio, where I make recordings for my church’s music and theater
ministries.

Thanks Vlad for the inspiration

mce
Home Audio & Home Theater

Image by Thomas Hawk
My Media Center Living Room Set Up

05-24-2004
Home Audio & Home Theater

Image by david.moffitt
Max, Aaron and I setting up the Home Theater in my 2nd apartment (2 bdr with Aaron) in 1 Pleasant St.

Tags: ,


Mar 11 2012

wiring above receiver

Category: Home Audio & Home TheaterDigitalReviews @ 4:19 pm

Check out these Home Audio & Home Theater images:

wiring above receiver
Home Audio & Home Theater

Image by mikemol
Top two (copper) are 12ga rope-braided speaker wire. (Dayton SKRL-12-100 12) Pinned as a pair with 3/4" plastic cable staples, also picked up at Home Depot. They replaced some crappy 16ga I’d been feeding the front left and right channels, whose speakers consume up to 100W each. I was losing 30db across the 16ga; It’s a 50ft run.

The bottom two are RG-6, using F-type-to-RCA adapters on either end; They’re actually carrying headphone-level audio from the receiver to the subwoofer, whose internal amp has a built-in crossover. Once I get my receiver-side crossover set up, one will carry plain cable, while the other will carry LFE.

I did what I could to reduce cable strain.

The remaining crap isn’t my wiring; It’s phone, power and cable.

Wiring leading to TV and speakers
Home Audio & Home Theater

Image by mikemol
Top cable is HDMI, leading to the TV, pinned with 11mm round cable staples I picked up at Home Depot.

Next two (copper) are 12ga rope-braided speaker wire. (Dayton SKRL-12-100 12) Pinned as a pair with 3/4" plastic cable staples, also picked up at Home Depot. They replaced some crappy 16ga I’d been feeding the front left and right channels, whose speakers consume up to 100W each. I was losing 30db across the 16ga; It’s a 50ft run.

The bottom two are RG-6, using F-type-to-RCA adapters on either end; They’re actually carrying headphone-level audio from the receiver to the subwoofer, whose internal amp has a built-in crossover. Once I get my receiver-side crossover set up, one will carry plain cable, while the other will carry LFE.

Hanging grayish cable is a plug for the light in the room. I’ve got it stapled, but I’d *really* like to be able replace the light and wire it in directly. At least I’ve got it stapled, so it’s not hanging down as far…

Home Entertainment Setup
Home Audio & Home Theater

Image by -DjD-
This is my home theater setup. See here for the projector, and here for the full frontal view.

From the Mini we can:
* Watch Movies, TV Shows, and listen to Music via FrontRow
* Watch US TV via Slingplayer and our stateside DVR.
* Watch DVDs, Joost, and Netflix video on demand (unfortunately the latter is only available via BootCamp)

The video source is switched between the Wii and Mini on the projector with a single button. All the audio is routed to the HiFi via the black selector box.

The best part is, the setup is completely country agnostic so it should break down and setup in the UK identically (time will tell).

Tags: , ,


Mar 10 2012

Cool Home Audio & Home Theater images

Category: Home Audio & Home TheaterDigitalReviews @ 11:20 pm

Some cool Home Audio & Home Theater images:

Home Entertainment
Home Audio & Home Theater

Image by Alan_D
The Sky decoder and Sony Home Theatre system amplifer/DVD player and centre speaker.

It’s just a standard Sky decoder, none of this fancy Sky+ here. There is a HDD DVD recorder out of shot which does the same job albeit without quite as much convenience as Sky+.

Epson Home CInema 1080 projected scene from Ultraviolet
Home Audio & Home Theater

Image by Projector People
Kevin Johnson, Epson Home Cinema 1080 owner since April 2007 says…

"A little over a year and a half ago, I went to a buddy’s house and was astonished as he showed me a movie on a 10 foot wide screen. Afterwards, he showed me how he did it using a small shelf-mounted LCD projector across the room. I was instantly hooked…

Click here to view full showroom » or for more images from this amazing theater, please visit Kevin Johnson’s own Flickr show »

Tags: , , , ,


Next Page »